Logo for Buildeazy.com.au website

Novice Woodworkers

Julie's build Instructions Plans

Build an Adirondack chair   By Les Kenny

[Table of contents are below]

Step 1. Cut the Adirondack chair pieces

Cut all the pieces to the lengths given below

Out of 75mm x 50mm stock:   cut 2 pieces @ 522mm for the spreaders.

Out of 150mm x 25mm stock:
cut 2 pieces 975mm long for the side pieces
cut 4 pieces 950mm long for the back boards
cut 5 pieces 565mm long for the seat slats, then out of that rip (cut lengthwise) 18 pieces 32mm wide
cut 2 pieces 746mm long for the arms
cut 1 piece 710mm long for the middle rail
cut 4 pieces 565mm long for the 2 legs and the 2 temporary props
cut 1 piece 434mm long for the bottom rail
cut 2 pieces 200mm long for the arm corbels

Does your stack of cut pieces look a bit like this? 'cause it should.
cut wood pieces for an Adirondack chair

Home  |  About  |  Contact  |  Help  |  Advertise  |  Site rules  |  What's here  |  Projects  |  Share your projects  |  Your projects  |  Gallery  |  $5 plans  |  Free plans  |  Videos  |  Shop  |  Subscribe
Copyright buildeazy.com.au all rights reserved